-
how to choose anti-corrosion coatings?
anticorrosive coating is a coating that is coated on the surface of an object and can form a thin film, which has protective, decorative or other special functions (insulation, rust prevention, mildew prevention, heat resistance, etc.). According to the composition can generally be divided into: epoxy anticorrosive coatings, polyurethane anticorrosive coatings, acrylic anticorrosive coatings, inorganic anticorrosive coatings; perchloroethylene anticorrosive coatings, chlorinated rubber anticorro
넶1 2024-08-14 -
Steel structure anti-corrosion paint storage matters
steel structure is an indispensable element in every industrial field. However, for the process of how to use paint, people may know the process of using paint, but how much do they know about paint storage? Yuanfeng Xiaopu will introduce you
넶0 2024-08-14 -
metal fluorocarbon paint construction method reference!
① The new cement mortar and concrete surface shall be dried for a reasonable period of time to make the water content ≤ 8% and PH ≤ 10;
② the grass-roots should be firm, no powder, no sand, no hollowing, no cracking, no peeling; should be clean, the surface no dust, no laitance, no oil, no embroidery spots, no mildew, no salt and other debris;
③ The surface painting layer of the base layer must be solid and firm, and there should be no defects such as cracks and hollowing. The yin and ya넶0 2024-08-14
-
Normal temperature aluminum veneer spraying process
1. It is recommended to build a self-built phosphating tank. According to the different materials of aluminum materials, soak for 20min-30min and dry it before drying;
넶0 2024-08-14 -
medium temperature aluminum veneer fluorocarbon spraying construction technology
1.1 selects suitable sand for different types of aluminum materials and then carries out grinding treatment, and pickles (or alkali washing) the polished aluminum materials → phosphating and passivating → surface adjustment. Surface Cleaning
넶0 2024-08-14 -
Stainless steel surface fluorocarbon paint construction process
1. Sanding stainless steel parts with grinding wheels. According to different materials, 200-400 mesh grinding wheels are generally used for grinding. After sufficient grinding and uniformity, wipe them clean with solvent. (The roughness is required to reach about 20μm.) Pay attention to the strength when polishing, do not scratch the substrate, and there shall be no missing places.
넶0 2024-08-14
